RECOMMENDED PRODUCTS AND SERVICES

TEST AMMUNITION: A special service that I offer to my clients is to design and custom load four different loads (5 rounds each) in one box of ammunition. This will allow you to determine which load will perform best in your rifle without having to purchase several full boxes of ammunition. Once you have determined the best load in your particular rifle, I will duplicate this load for all subsequent orders. This service is especially important for those wishing to regulate a Nitro Express double rifle without spending a small fortune for ammunition in the process. Please note that there is an $10.00 fee for this service. I also offer identical loads in both X-bullets and Super Solids to ensure the closest possible point of impact between both types of bullets.

 

AMMUNITION REGULATING FOR DOUBLE RIFLES: This service is especially important for those wishing to regulate a Nitro Express double rifle without spending a small fortune for ammunition in the process. I will supply you with a box of twenty custom loaded cartridges that contains five (5) different loads of four (4) rounds each. This will allow you to test five different loads to determine which will regulate best in your particular double rifle. Please note that there is a $15.00 fee for this service.

 

Nickel plated cases are available in certain calibers, and can be substituted for non-plated cases at $4.00 per twenty (20) rounds.

 

LOAD DEVELOPMENT SERVICE: If requested I will develop a custom load in your rifle. Please call for shipping instructions. Cost: Bolt action, single shot or lever rifles $175.00 per load per rifle plus the cost of the ammunition utilized in developing the load.  Double rifles $250.00 per rifle plus the cost of the ammunition utilized in regulating.

 

BARNES CR-10: This specially formulated bore cleaning solvent effectively removes all copper and powder fouling leaving the rifling completely clean, and allowing you to obtain the utmost accuracy from your ammunition. 8 oz. $12.00

 

TETRA GUN LUBRICANTS: These products are definitely the leading edge in firearms treatments. Developed expressly for ballistics applications, Tetra’s patented submicroscopic flouropolymer particles electrostatically bond to all metal surfaces by penetrating and filling the microscopic pores of the metal. This process greatly reduces fouling by eliminating friction within the bore. Once Tetra lubricants have been embedded they will not evaporate or wear off under normal use. The advantages are a substantial increase in velocity, accuracy and barrel life in most firearms as proven in independent laboratory testing. These products are simple to use and come with complete directions. The complete Tetra Gun Kit containing Tetra penetrating oil for treating rifle bores, Tetra light lubricant and cleaner, Tetra bore cleaner and Tetra gun grease is only $24.00.

TSX Box Maximum-Range X-Bullets™


The latest member of the deadly X-Bullet family, the MRX™ features a heavier-than lead tungsten core in its base, along with a Delrin tip. This premium, high-BC hunting bullet is specifically designed to deliver deadly performance at long range.

· Deadly Long-Range Accuracy

· High Ballistic Coefficient

· Flatter Trajectory

· Greater Energy at Long Range

· Complete Penetration

· Double-Diameter Expansion

· Razor-Sharp Cutting Edges

· Full Weight Retention

· Completely Lead-Free

New for 2006, Barnes’ super-premium, Maximum-Range X-Bullet™ is designed for hunters who demand 100-percent reliable performance and one-shot kills at extended distances. The boattail MRX™ bullet combines the best features and deadly killing power of Barnes’ copper Triple-Shock™ X-Bullet with a new Delrin™ tip and a tungsten core.

The denser-than-lead tungsten core moves the MRX bullet’s center of gravity rearward, producing optimum ballistic performance, maximum penetration and the same exceptional accuracy Triple-Shock Bullets are famous for. A heavy tungsten core surrounded by a controlled-expanding all-copper body means game-dropping performance no lead-core bullet can match. Unlike soft lead cores that fragment or squeeze out under pressure, the tough MRX tungsten core retains its shape on impact, maintaining bullet integrity.

Adding a streamlined Delrin tip gives this premium bullet a higher ballistic coefficient (BC), allowing the MRX bullet to deliver flatter trajectory and greater retained energy at long range. Unlike some plastic-tipped bullets, the Delrin-tipped MRX won’t fragment on impact or blow up on game. The MRX bullet provides controlled expansion at both short and long range. The nose of the bullet peels back into four razor-sharp copper petals that resist shearing off. The new bullet typically retains 100 percent of its original weight and delivers the deep-penetrating, bone-smashing power needed for raking shots at large game.

Like the all-copper Barnes-X and Triple-Shock X-Bullets, the new Maximum-Range X-Bullet contains no lead to contaminate venison. The MRX is the X-Bullet to choose when you need to make difficult shots at extreme distances. It’s a super-premium bullet that delivers dependable long-range kills.

The following bullets will be available Spring of 2007:


270 Caliber
  Diameter Weight Description S.D. B.C. CAT#
NEW .277" 130 gr MRX BT
.242
  27783
NEW .277" 150 gr MRX BT  .279   27785


7mm Caliber
  Diameter Weight Description S.D. B.C. CAT#
NEW .284" 140 gr MRX BT .248   28484
NEW .284" 160 gr MRX BT .283   28486




30 Caliber
  Diameter Weight Description S.D. B.C. CAT#
NEW .308" 150 gr MRX BT .226   30882
NEW .308" 165 gr MRX BT .248   30885
NEW .308" 180 gr MRX BT .271   30888



338 Caliber
  Diameter Weight Description S.D. B.C. CAT#
NEW .338" 185 gr MRX BT .231   33863
NEW .338" 225 gr MRX BT .281   33867
 

TRIPLE SHOCK X - BULLET:

TSX Box Triple ShockBullet

TSX Bullet firedIn 2003, Barnes introduced the Triple-Shock X-Bullet™. Identifiable by rings cut into its copper body, it offers all the qualities that have made the X-Bullet™ a favorite of knowledgeable hunters everywhere. Like the X-Bullet™, the Triple-Shock X™ features all-copper construction, no fragmentation, maximum weight retention and 28 percent deeper penetration than the best lead-core bullets offered. On impact, the bullet face opens to create four razor-sharp cutting edges.

The new Triple-Shock X™ ringed bullet provides significantly greater velocities, lower pressures and less fouling, without requiring an external coating. The bullet delivers a triple impact-one when it first strikes game, another as the bullet begins opening, and a third devastating impact when the specially engineered cavity fully expands to deliver extra shock with maximum transferred energy.

Barnes' revolutionary Triple-Shock X™ design provides all the benefits of the time-proven XLC-coated X-Bullet™. In addition to greater velocities, reduced pressures and less copper fouling, the Triple-Shock X™ delivers a three-punch impact that's deadly on game.


The Triple-Shock X-Bullet™ offerings for 2006 are:


22 Caliber
  Diameter Weight Description S.D. B.C. CAT#
 

.224"

53 gr TSX FB .151 .231 22443
NEW

.224"

70 gr TSX BT .199 .314 22470

6mm Caliber
Diameter Weight Description S.D. B.C. CAT#
.243" 85 gr TSX BT .206 .333 24341

25 Caliber
Diameter Weight Description S.D. B.C. CAT#
.257" 100 gr TSX BT .216 .420 25742
.257" 115 gr TSX FB .249 .429 25743

6.5 Caliber
  Diameter Weight Description S.D. B.C. CAT#
NEW .264" 120 gr. TSX BT .246 .441 26441
  .264" 130 gr. TSX FB .266 .479 26442

6.8 Caliber
  Diameter Weight Description S.D. B.C. CAT#
NEW .277" 110 gr. TSX BT .205 .323 27738

270 Caliber
  Diameter Weight Description S.D. B.C. CAT#
  .277" 130 gr TSX BT .242 .466 27742
  .277" 140 gr TSX BT .261 .497 27744
NEW .277" 150 gr TSX FB  .279 .491  27746

7mm Caliber
  Diameter Weight Description S.D. B.C. CAT#
NEW .284" 120 gr TSX BT .213 .411 28442
  .284" 140 gr TSX BT .248 .477 28444
  .284" 160 gr TSX FB .283 .508 28446
NEW .284" 150 gr TSX BT .266 .529 28447

30 Caliber
  Diameter Weight Description S.D. B.C. CAT#
NEW .308" 130 gr TSX BT .196 .374 30838
  .308" 150 gr TSX BT .226 .428 30841
NEW .308" 165 gr TSX BT .248 .505 30843
  .308" 168 gr TSX BT .253 .476 30844
  .308" 180 gr TSX BT .271 .552 30846
  .308" 200 gr TSX FB .301 .550 30848


8mm Caliber
  Diameter Weight Description S.D. B.C. CAT#
NEW .323" 180 gr. TSX BT .246 .382 32306

338 Caliber
  Diameter Weight Description S.D. B.C. CAT#
  .338" 185 gr TSX BT .231 .437 33843
NEW .338" 210 gr TSX BT .263 .471 33845
  .338" 225 gr TSX FB .281 .482 33846

358 Caliber
  Diameter Weight Description S.D. B.C. CAT#
NEW .358" 225 gr TSX FB .251 .405 35824

9.3mm Caliber
  Diameter Weight Description S.D. B.C. CAT#
NEW .366" 250 gr TSX FB .267 .428 36625
NEW .366" 286 gr TSX FB .305 .468 36628

375 Caliber
  Diameter Weight Description S.D. B.C. CAT#
NEW .375" 270 gr TSX FB .274 .503 37556
NEW .375" 300 gr TSX FB .305 .555 37558

416 Caliber
  Diameter Weight Description S.D. B.C. CAT#
NEW .416" 350 gr TSX FB .289 .521 41686
NEW .416" 400 gr TSX FB .330 .546 41689

458 Caliber
  Diameter Weight Description S.D. B.C. CAT#
NEW .458" 450 gr TSX FB .306 .488 45819
NEW .458" 500 gr TSX FB .341 .526 45821

 

 

 

Tipped TSX Bullet



 

Since its introduction in 2003, Barnes’ Triple-Shock X Bullet has earned a reputation as “the perfect hunting bullet.” Now, Barnes has improved on perfection by adding a streamlined polymer tip.

The new Tipped TSX features the same 100-percent copper body with multiple rings cut into the shank. It delivers the same gnat’s eyelash accuracy and “dead right there” performance—but with an added polymer tip that boosts BC and improves long-range ballistics. The tip and a re-engineered nose cavity provide even faster expansion.

Complete penetration, virtually 100 percent weight retention and four razor-sharp cutting petals that doubles bullet diameter means the new Tipped TSX creates more internal damage than any competing bullet. Instant expansion and perfect penetration ensures cleaner, quicker kills.

The Barnes Tipped TSX—accept no imitations.

· 100% lead-free
· Grooved for lower pressures
· Higher ballistic coefficient
· Deadly accuracy
· 99-100% weight retention

 


 
Diameter
Weight
Description
S.D.
B.C.
CAT#
NEW .277" 110 gr Tipped TSX BT
.205
.377
27772
NEW .277 130 gr Tipped TSX BT
.242
.392
27775



 
Diameter
Weight
Description
S.D.
B.C.
CAT#
NEW .284" 120 gr Tipped TSX BT
.213
.373
28472
NEW .284" 140 gr Tipped TSX BT
.248
 
38474



 
Diameter
Weight
Description
S.D.
B.C.
CAT#
NEW .308" 130 gr Tipped TSX BT
.196
.350
30873
NEW .308" 150 gr Tipped TSX BT
.226
 
30875
NEW .308" 168 gr Tipped TSX BT
.253
 
30878
NEW .308" 180 gr Tipped TSX BT
.271
  30879



 
Diameter
Weight
Description
S.D.
B.C.
CAT#
NEW .338" 160 gr Tipped TSX BT
.200
 
33873
NEW .338" 210 gr Tipped TSX BT
.263
 
33876
NEW .338" 225 gr Tipped TSX BT
.281
 
33879

 

 

 

Solids Box Banded Solids
& Solids


Designed for stopping large, dangerous game, Barnes' round-nose Solids can be depended on to deliver straight, bone-shattering penetration every time. Unlike other so-called "solid" bullets that are actually full metal-jacketed bullets with lead cores, Barnes' Solids are made of tough copper/zinc alloy throughout. There's no separate jacket to shed, and no lead core that can break up or deform. When it strikes heavy bone, the Barnes Solid doesn't disintegrate or deflect; it simply plows on through. Barnes' Solids range from 45-grain .22-caliber (.224 inch) bullets to massive 900-grain bullets for the .600 Nitro Express. Spitzer-shaped solids-which are deadly for hunting varmints and fur-bearing animals, yet create minimal damage to valuable pelts-are offered in .22 (.224 inch) through .338 (.338-inch) calibers.


22
Dia. Weight Desc. S.D. B.C. Cat. #
.224" 45 gr Solid .128 .212 22401
.224" 50 gr. Solid .142 .235 22402

6mm
Dia. Weight Desc. S.D. B.C. Cat. #
.243" 75 gr. Solid .181 .330 24301

25
Dia. Weight Desc. S.D. B.C. Cat. #
.257" 90 gr. Solid .195 .324 25720

7mm
Dia. Weight Desc. S.D. B.C. Cat. #
.284" 100 gr. Solid .177 .343 28401

30
Dia. Weight Desc. S.D. B.C. Cat. #
.308" 110 gr. Solid .166 .337 30811
.308" 125 gr. Solid .188 .372 30812
.308" 165 gr. Solid .248 .481 30822
.308" 220 gr. Solid .331 .305 30842

338
Dia. Weight Desc. S.D. B.C. Cat. #
.338" 250 gr. Solid .313 .326 33825

9.3
Dia. Weight Desc. S.D. B.C. Cat. #
.366" 286 gr. Solid .305 .342 36612

375
Dia. Weight Desc. S.D. B.C. Cat. #
.375" 270 gr Banded .274 .284 37513
.375" 300 gr. Banded .305 .307 37526

416
Dia. Weight Desc. S.D. B.C. Cat. #
.416" 350 gr. Banded .289 .364 41629
.416" 400 gr. Banded .330 .388 41635

458
Dia. Weight Desc. S.D. B.C. Cat. #
.458" 450 gr. Banded .306 .362 45828
.458" 500 gr. Banded .341 .394 45856

50 BMG LRS
Dia. Weight Desc. S.D. B.C. Cat. #
.510" 750 gr. Solid .412 1.070 510750
.510" 750 gr. Solid .412 1.070 510750A
.510" 750 gr. Solid .412 .766 501750T
.510" 800 gr. Solid .439 1.095 510800A

577 Nitro
Dia. Weight Desc. S.D. B.C. Cat. #
.585" 750 gr. Solid .313 .351 58520

600 Nitro
Dia. Weight Desc. S.D. B.C. Cat. #
.620" 900 gr. Solid .334 .380 62020

 

 

MOLY COATING: Molybdenum Disulfide, properly applied to your bullets, offers three distinct advantages. Higher velocity, better accuracy and reduced fouling. By reducing the friction between the bullet and the bore of your firearm, moly reduces pressures and bore fouling, and permits higher velocities, normally with increased accuracy. Moly coating is especially beneficial in the larger over-bore magnum calibers such as the 7MM S.T.W., .30-.378 and .338-378 Weatherby Magnums, as it can reduced throat erosion by reducing friction and heat. Cost is $5.00 per twenty rounds of ammunition.

 

MOLY BORE PREP: A superior product that prepares your bore for moly coated bullets is now available. Cost $18.00 per 2 ounce bottle. Each bottle will do hundreds of bore coatings.

 

 

TERMS AND CONDITIONS OF SALE : 

All orders must be prepaid by credit card, check or money order. 

Shipping charges are $9.00 for the first box, $3.00 for each additional box. 

Calibers from .323 caliber and larger are charged at $10.00 for the first box and $3.00 each additional box due to their heavier weight and additional insurance required. 

All orders are shipped via U.P.S. ground to the first 48 states. Shipments to Alaska and Hawaii are by Federal Express second day air only, and will be charged actual shipping costs and applicable hazmat fees.

 

Please note that I must have a copy of your drivers license and a signed letter stating that there are no local laws or ordinances prohibiting you from purchasing ammunition through the mail.